Note: At the time of writing, you can have only one DSL PTM interface on the ZyXEL
Device.
Figure 28 Layer 2 Interface
The following table describes the fields in this screen.
Table 9 Layer 2 Interface
LABEL
Interface
Connection Mode This shows the connection mode of the DSL interface.
QoS
Remove
Add
P-870H/HW Series User's Guide
DESCRIPTION
This is the name of the interface.
This shows whether QoS (Quality of Service) is enabled on the ZyXEL
Device.
Click the Remove button to delete this interface from the ZyXEL
Device. A window displays asking you to confirm that you want to
delete the interface.
You cannot remove the DSL interface when a service is associated with
it.
Click this button to create a new DSL interface.
Chapter 5 WAN Setup
57