Configuring The Wireless Client - ZyXEL Communications P-870H-53A v2 User Manual

Chapter 2 Tutorials
Click the WLAN Station List hyperlink in the AP's Status screen. You can see if
7
any wireless client has connected to the AP.
Figure 7 AP: Status: WLAN Station List

2.1.3 Configuring the Wireless Client

This section describes how to connect the wireless client to a network.
2.1.3.1 Connecting to a Wireless LAN
The following sections show you how to join a wireless network using the ZyXEL
utility, as in the following diagram. The wireless client is labeled C and the access
point is labeled AP.
There are three ways to connect the client to an access point.
• Configure nothing and leave the wireless client to automatically scan for and
connect to any available network that has no wireless security configured.
• Manually connect to a network.
• Configure a profile to have the wireless client automatically connect to a specific
network or peer computer.
30
C
AP
P-870H/HW Series User's Guide
Internet