Chapter 9 MAC Filter
MAC filtering rules. The MAC filtering rules apply only to frames going through a
bridge connection.
Figure 73 MAC Filter
The following table describes the labels in this screen.
Table 44 MAC Filter
LABEL
MAC Filtering
Policy For Each
Interface
Interface
Policy
Change
Change Policy
Interface
Protocol
Destination
MAC
Source MAC
Frame Direction This displays the direction of travel of frame to which this rule applies.
Remove
132
DESCRIPTION
This displays the interface to which this rule is applied.
This displays the MAC filtering policy for each WAN interface in bridge
mode on the ZyXEL Device. By default, the ZyXEL Device allows all
frames to pass through the bridge connection.
Select the check box next to the interface for which you want to change
the MAC filtering policy.
Select the Change check box and click Change Policy to have the
ZyXEL Device change to block or allow all frames on this interface.
This displays the interface to which this rule is applied.
This displays the service to which this rule applies.
This displays the destination MAC address to which this rule applies.
Please note that a blank destination address is equivalent to Any.
This displays the source MAC address to which this rule applies. Please
note that a blank source address is equivalent to Any.
Select the rule(s) you want to delete in the Remove column and then
click the Remove button.
P-870H/HW Series User's Guide