ZyXEL Communications P-870H-53A v2 User Manual page 65

IPoE
This screen displays when you select IP over Ethernet in the WAN Service
Configuration screen.
Figure 34 WAN Configuration: IPoE
The following table describes the labels in this screen.
Table 15 WAN Configuration: IPoE
LABEL
Obtain an IP
address
automatically
Enable DHCP
Option 60
Vendor Class
Identifier
Enable DHCP
Option 61
IAID
P-870H/HW Series User's Guide
DESCRIPTION
A static IP address is a fixed IP that your ISP gives you. A dynamic IP
address is not fixed; the ISP assigns you a different one each time you
connect to the Internet. Select this if you have a dynamic IP address.
Select this to identify the vendor and functionality of the ZyXEL Device
in DHCP requests that the ZyXEL Device sends to a DHCP server when
getting a WAN IP address.
Enter the Vendor Class Identifier (Option 60), such as the type of the
hardware or firmware.
Select this to identify the ZyXEL Device in DHCP requests that the
ZyXEL Device sends to a DHCP server when getting a WAN IP address.
Enter the Identity Association Identifier (IAID) of the ZyXEL Device.
For example, the WAN connection index number.
Chapter 5 WAN Setup
65