Table of Contents
Advertisement
Chapter 4 Status Screens
Each field is described in the following table.
Table 3 Status Screen
LABEL
Refresh Interval Enter how often you want the ZyXEL Device to update this screen.
Apply
Device
Information
User Name
Model
Number
MAC
Address
Firmware
Version
DSL
Firmware
Version
WAN
Information
Mode
IP Address
IP Subnet
Mask
LAN
Information
IP Address
IP Subnet
Mask
DHCP
WLAN
Information
Channel
44
DESCRIPTION
Click this to update this screen immediately.
This field displays the ZyXEL Device system name. It is used for
identification. Click this to go to the screen where you can change it.
This is the model name of your device.
This is the MAC (Media Access Control) or Ethernet address unique to
your ZyXEL Device.
This field displays the current version of the firmware inside the device.
It also shows the date the firmware version was created. Click this to go
to the screen where you can change it.
This field displays the current version of the device's DSL modem code.
This is the method of encapsulation used by your ISP.
This field displays the current IP address of the ZyXEL Device in the
WAN.
This field displays the current subnet mask in the WAN.
This field displays the current IP address of the ZyXEL Device in the
LAN. Click this to go to the screen where you can change it.
This field displays the current subnet mask in the LAN.
This field displays what DHCP services the ZyXEL Device is providing to
the LAN. Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP
addresses to other computers in the LAN.
Relay - The ZyXEL Device acts as a surrogate DHCP server and relays
DHCP requests and responses between the remote server and the
clients.
None - The ZyXEL Device is not providing any DHCP services to the
LAN.
Click this to go to the screen where you can change it.
This is the channel number used by the ZyXEL Device now.
P-870H/HW Series User's Guide
Advertisement
Table of Contents
