Creating Mac Filtering Rules - ZyXEL Communications P-870H-53A v2 User Manual

Table 44 MAC Filter (continued)
LABEL
Add
Remove

9.2.1 Creating MAC Filtering Rules

In the MAC Filter screen, click Add to display this screen and refer to the
following table for information on the labels.
Figure 74 MAC Filter: Add
The following table describes the labels in this screen.
Table 45 MAC Filtering: Add
LABEL
Protocol Type
Destination MAC
Address
Source MAC
Address
Frame Direction
WAN Interfaces
Save/Apply
P-870H/HW Series User's Guide
DESCRIPTION
Click Add to create a new rule.
Click Remove to delete the selected rule(s).
DESCRIPTION
Select the service to which this rule applies.
Enter a destination MAC address in valid MAC address format, that is,
six hexadecimal character pairs to apply the filter rule to the specified
MAC address. Please note that a blank destination address is
equivalent to Any.
Enter a source MAC address in valid MAC address format, that is, six
hexadecimal character pairs to apply the filter rule to the specified
MAC address. Please note that a blank source address is equivalent to
Any.
Select the travel direction of frame to which this rule applies.
Select the WAN interface to which this rule applies.
Click Save/Apply to save your customized settings and exit this
screen.
Chapter 9 MAC Filter
133