ZyXEL Communications P-870H-53A v2 User Manual page 61

The following table describes the labels in this screen.
Table 12 WAN Configuration: WAN Interface
LABEL
Select a layer 2
interface for this
service
Back
Next
5.5.1.2 Service Type
Figure 32 WAN Configuration: Service Type
The following table describes the labels in this screen.
Table 13 WAN Configuration: Service Type
LABEL
Select WAN
service type
Enter Service
Description
Rate Limit
Tag VLAN ID
for egress
packets
P-870H/HW Series User's Guide
DESCRIPTION
Select ptm0 to use the DSL port as the WAN port for this connection.
Click this button to return to the previous screen.
Click this button to continue.
DESCRIPTION
Select the method of encapsulation used by your ISP.
Choices are PPP over Ethernet (PPPoE), IP over Ethernet and
Bridging.
Specify a name for this connection or use the automatically generated
one.
Enter the maximum transmission rate in Kbps for traffic sent through the
WAN connection. Otherwise, leave this field blank to disable the rate
limit.
Select this option to add the VLAN tag (specified below) to the outgoing
traffic through this connection.
This field is available when the PTM interface is in VLANMUX mode.
Chapter 5 WAN Setup
61