Table of Contents
Advertisement
Chapter 17 Remote Management
17.4 The Service Control Screen
Click Advanced > Remote MGMT > Service Control to open the following
screen. Use this screen to decide what services you may use to access which
ZyXEL Device interface.
Figure 101 Service Control
The following table describes the fields in this screen.
Table 72 Access Control: Services
LABEL
Service Control
#
Services
LAN
WAN
Apply
182
DESCRIPTION
Select Enable to turn on service control. Otherwise, select Disable.
This is the index number of the entry.
This is the service you may use to access the ZyXEL Device.
Select the Enable check box for the corresponding services that you
want to allow access to the ZyXEL Device from the LAN.
Select the Enable check box for the corresponding services that you
want to allow access to the ZyXEL Device from the WAN.
Click this button to save your changes back to the ZyXEL Device.
P-870H/HW Series User's Guide
Advertisement
Table of Contents
