Table of Contents
Advertisement
L Radio Data System indicators
(Europe model only)
PTY HOLD
Lights up while searching for the Radio Data System
stations in the PTY SEEK mode.
PS, PTY, RT and CT
Light up according to the selected Radio Data System
display mode.
EON
Lights up when the EON data service is being
received.
M SLEEP indicator
Lights up while the sleep timer is on (see page 41).
N 96/24 indicator
Lights up when a DTS 96/24 signal is input to this unit.
O Input channel and speaker indicators
LFE indicator
LFE
Presence speaker indicators
L C R
Input channel indicators
SL SB SR
Surround back speaker indicators
LFE indicator
Lights up when the input signal contains the LFE
signal.
Input channel indicators
Indicate the channel components of the current digital
input signal.
Presence and surround back speaker
indicators
Light up according to the number of presence and
surround back speakers set for "EXTRA SP ASSIGN"
(see page 70) and "SUR.B L/R SP" (see page 71) in
"SOUND MENU" when this unit is in the auto setup
(see page 28) or the speaker level setting in "SOUND
MENU" (see page 72) procedure.
y
• You can make settings for surround back speakers automatically
by running "AUTO SETUP" (see page 28) or manually by
adjusting settings for "SUR.B L/R SP" (see page 71) in
"SOUND MENU".
• To use the presence speakers, set "EXTRA SP ASSIGN" to
"PRESENCE" (see page 29 or 70).
Using the remote control
The remote control transmits a directional infrared ray.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
Approximately 6 m (20 ft)
Infrared window ( Y )
Outputs infrared control signals. Aim this window at the
component you want to operate.
Transmit indicator ( X )
Flashes while the remote control is sending infrared
signals.
Display window ( J )
Shows the name of the selected input source that you can
control.
Operation mode selector ( L )
The function of some buttons depends on the operation
mode selector position.
AMP
Operates the amplifier function of this unit.
SOURCE
Operates the component selected with an input
selector button (see page 85).
TV
Operates the TV assigned to either DTV/CBL or
PHONO (see page 84).
Notes
• Do not spill water or other liquids on the remote control.
• Do not drop the remote control.
• Do not leave or store the remote control in the following types
of conditions:
– places of high humidity, such as near a bath
– places of high temperatures, such as near a heater or stove
– places of extremely low temperatures
– dusty places
• To set the remote control codes for other components, see
page 86.
Connections
Remote control sensor
30
30
27
En
Advertisement
Table of Contents
