Table of Contents
Advertisement
Advanced sound configurations
Sound field parameter
ROOM SIZE
P.ROOM SIZE
S.ROOM SIZE
SB ROOM SIZE
LIVENESS
S.LIVENESS
SB LIVENESS
62
En
Room size. Presence, surround, and surround back room size. Adjusts the apparent size of the
surround sound field. The larger the value, the larger the surround sound field becomes. As the
sound is repeatedly reflected around a room, the larger the hall is, the longer the time between
the original reflected sound and the subsequent reflections. By controlling the time between the
reflected sounds, you can change the apparent size of the virtual venue. Changing this parameter
from one to two doubles the apparent length of the room.
y
When you adjust the room size parameters, we also recommend that you adjust the
corresponding initial delay parameters likewise. This adjustment is especially effective for the
CINEMA DSP programs.
Control range: 0.1 to 2.0
Time
Sound source
Small value = 0.1
Liveness. Surround and surround back sound field liveness. Adjusts the reflectivity of the virtual
walls in the hall by changing the rate at which the early reflections decay. The early reflections of
a sound source decay much faster in a room with acoustically absorbent wall surfaces than in one
which has highly reflective surfaces. A room with acoustically absorbent surfaces is referred to
as "dead", while a room with highly reflective surfaces is referred to as "live". This parameter
lets you adjust the early reflection decay rate and thus the "liveness" of the room.
Control range: 0 to 10
Dead
Time
Small reflected
sound
Small value = 0
Features
Source sound
Early
reflections
Time
Source sound
Time
Large reflected
sound
Large value = 10
Time
Large value = 2.0
Live
Time
Advertisement
Table of Contents
