Table of Contents
Advertisement
Customizing this unit (MANUAL SETUP)
LFE/Bass out LFE/BASS OUT
Use this feature to select the speakers that output the LFE
(low-frequency effect) and the low-frequency signals.
Choices: SWFR, FRNT, BOTH
SOUND MENU
LFE/BASS OUT
SWFR FRNT>BOTH
When a subwoofer is connected to this unit
and you want to get natural bass sound
Select "SWFR" (subwoofer). The LFE signals as well
as the low-frequency signals of other speakers set to
"SML" (or "SMALL") are directed to the subwoofer.
When a subwoofer is connected to this unit
and you want to get rich bass sound
Select "BOTH" (both). The low-frequency signals of
any source are output from the subwoofer. The LFE
signals as well as the low-frequency signals of other
speakers set to "SML" (or "SMALL") are directed to
the subwoofer. The low-frequency signals of the front
left and right channels are directed to the front left and
right speakers and the subwoofer regardless of the
"FRONT SP" setting.
When you do not use a subwoofer
Select "FRNT" (front). The LFE signals, the
low-frequency signals of the front left and right
channels, and the low-frequency signals of other
speakers set to "SML" (or "SMALL") are all directed
to the front left and right speakers regardless of the
"FRONT SP" setting.
Bass crossover CROSSOVER
Use this feature to select the crossover frequency of all the
speakers set to "SML" (or "SMALL") or to "NONE" in
"SPEAKER SET" (see page 71). All frequencies below
the selected frequency will be sent to the subwoofer or to
the speakers set to "LRG" (or "LARGE") in "SPEAKER
SET" (see page 71).
Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz,
120Hz, 160Hz, 200Hz
SOUND MENU
CROSSOVER
FREQ;;;80Hz
72
En
Subwoofer phase SUBWOOFER PHASE
Use this feature to switch the phase of your subwoofer if
bass sounds are lacking or unclear.
Choices: NORMAL, REVERSE
SOUND MENU
SUBWOOFER PHASE
>NORMAL
• Select "NORMAL" if you do not want to reverse the
phase of your subwoofer.
• Select "REVERSE" to reverse the phase of your
subwoofer.
■ Speaker level
B)SPEAKER LEVEL
Use this feature to manually adjust the output level of each
speaker.
Control range: –10.0 to 10.0 dB
Control step: 0.5 dB
Initial setting: 0.0 dB
SOUND MENU
B)SPEAKER LEVEL 1/2
- __________ +
.
FL;;;;;;;;;;
FR;;;;;;;;;;
C;;;;;;;;;;
SWFR;;;;;;;;;;
SPEAKER LEVEL
FL
Front left speaker
FR
Front right speaker
C
Center speaker
SWFR
Subwoofer
SL
Surround left speaker
SR
Surround right speaker
SBR
Surround back right speaker
SBL
Surround back left speaker
PL
Presence left speaker
PR
Presence right speaker
Notes
• The available speaker channels differ depending on the setting
of the speakers.
• Instead of "SBL" and "SBR", "SB" is displayed if "SUR.B L/R
SP" is set to either "SMLx1" or "LRGx1" (see page 71).
REVERSE
Adjusted speaker
Advertisement
Table of Contents
