Table of Contents
Advertisement
Playback
Using your headphones
Connect a pair of headphones with a stereo
analog audio cable plug to the PHONES jack on
the front panel.
EDIT
SPEAKERS
PRESET/TUNING
FM/AM
A/B/C/D/E
1
PROGRAM
MAIN ZONE
MASTER
PHONES
TONE CONTROL
STRAIGHT
ON/OFF
SILENT CINEMA
EFFECT
ON
OFF
y
When you select a sound field program, SILENT CINEMA mode
activates automatically (see page 46).
Notes
• When you connect headphones, no signals are output at the
speaker terminals.
• All Dolby Digital and DTS audio signals are mixed down to the
left and right headphone channels.
Muting the audio output
Press M MUTE on the remote control to mute the
audio output.
Press M MUTE again to resume the audio output.
y
0
VOLUME on the front panel or press
• You can also rotate
K
VOLUME +/– to resume the audio output.
• You can adjust the muting level by using the "MUTE TYPE"
parameter in "SOUND MENU" (see page 74).
• The MUTE indicator flashes in the front panel display when the
audio output is muted and disappears from the front panel
display when the audio output is resumed.
40
En
VOLUME
ZONE 2
ZONE
PRESET/TUNING
MEMORY
TUNING
AUTO/MAN'L
ON/OFF
CONTROL
SCENE
2
3
4
INPUT
VIDEO AUX
PURE DIRECT
AUDIO SELECT
OPTIMIZER MIC
S VIDEO
VIDEO
L
AUDIO
R
Playing video sources in the
background of an audio source
You can combine a video image from a video source with
sound from an audio source. For example, you can enjoy
listening to classical music while viewing beautiful
scenery from the video source on the video monitor.
Press the input selector buttons ( B ) on the
remote control to select a video source and then
an audio source.
OPTICAL
PHONO
MULTI CH IN
V - AUX/DOCK
TUNER
MD/CD-R
DTV/CBL
DVR
y
Set the "BGV" parameter in the "MULTI CH SET" menu to the
desired setting to select the default background video input source
of the MULTI CH INPUT sources (see page 78).
Displaying the input source
information
You can display the format, sampling frequency, channel,
bit rate and flag data of the current input signal.
Set the operation mode selector to L AMP
1
and then press N SET MENU on the remote
control.
The top "SET MENU" display appears in the OSD.
2
Press D n repeatedly to select "SIGNAL
INFO" and then press D ENTER.
The audio information about the input source appears
in the OSD.
3
Press D l / h to toggle between the audio
and video information displays.
Press N SET MENU on the remote control
4
again to exit from "SET MENU".
CD
Audio sources
VCR
DVD
Video sources
SET MENU
. ;AUTO SETUP
;MANUAL SETUP
.A;SIGNAL INFO
[ ]/[ ]:Up/Down
[ENTER]:Enter
Advertisement
Table of Contents
