Configuring The System Settings (Advanced Setup Menu); Advanced Setup Menu Items; Checking The Firmware Version (Version); Selecting The Remote Control Id (Remote Id) - Yamaha R-N303 D Owner's Manual

Configuring the system settings (ADVANCED SETUP menu)

Configure the system settings of the unit while viewing the front display. The ADVANCED SETUP menu can be
operated from the front panel.
1
Press A (power) to turn off the unit.
2
While holding down RETURN on the front
panel, press A (power).
DISPLAY MODE MEMORY
BASS
PHONES SPEAKERS
A
(power) DISPLAY
3
Rotate SELECT/ENTER to select an item.
4
Press SELECT/ENTER to select a setting.
5
Press A (power) to set the unit to turn off and
turn it on again.
The new settings take effect.

ADVANCED SETUP menu items

Item
Checks the version of firmware
VERSION
currently installed on the unit.
Selects the unit's remote control ID.
REMOTE ID
Sets tuner frequency step.
*
TU
Restores the default settings.
INIT
Updates the firmware.
UPDATE
* Only for Asia and General models
RETURN
BAND PRESET TUNING
VOLUME
SELECT
TREBLE INPUT PUSH ENTER
RETURN
CONNECT
SELECT/ENTER
Function Page
43
43
43
43
44
Configuring the system settings (ADVANCED SETUP menu)
Checking the firmware version
(VERSION)
Check the version of firmware currently installed on the
unit.
Note
• You can also check the firmware version in "Update (Network
Update)" (p. 41) in the "SETUP" menu.
• It may take a while until the firmware version is displayed.
Selecting the remote control ID
(REMOTE ID)
This changes the remote control ID on the unit.
Normally, this should be set to "ID1". When operating the
unit using remote controllers included with certain
Yamaha players, set this to "AUTO".
Settings
ID1 (default), AUTO

Setting tuner frequency step (TU)

Selects the step size for locating tuner frequencies.
(Only for Asia and General models)
Settings
FM100/AM10, FM50/AM9 (default)

Restoring the default settings (INIT)

Restores the default settings for the unit.
Choices
CANCEL
Does not perform an initialization.
(default)
Initializes all of the network and Bluetooth
settings. If you initialize the unit, all presets for
NETWORK
the network input sources (p. 36) will be cleared.
Restores the default settings for the unit.
ALL
43
En