Table of Contents
Advertisement
SOUND FIELD PROGRAMS
This unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-channel playback from
almost any stereo or multi-channel sound source. This unit is also equipped with a Yamaha digital sound field processing
(DSP) chip containing several sound field programs which you can use to enhance your playback experience.
y
• The Yamaha HiFi DSP sound field programs recreate real-world acoustic environments made from precise measurements taken in
actual concert halls, music venues, movie theaters, etc. Thus, you may notice variations in the strength of the reflections coming from
the front, back, left and right.
• You can change sound field parameters. See page 59 for details.
Selecting sound field programs
Rotate the D PROGRAM selector (or set the
operation mode selector to L AMP and then
press one of the sound field selector buttons ( U )
repeatedly).
The name of the selected sound field program appears in
the front panel display and in the OSD.
Notes
• When you select an input source, this unit automatically selects
the last sound field program used with the corresponding input
source.
Sound field program descriptions
y
Select a sound field program based on your listening preference, not merely on the name of the program, etc.
Remote control
button
MOVIE
4
This program clearly reproduces the finely elaborated sound design of the latest science fiction and special effects-featuring movies.
You can enjoy a variety of cinematographically created virtual spaces reproduced with clear separation between dialog, sound effects and
background music.
DSP LEVEL
P.INIT. DLY
Available sound field parameters (see page 61)
Sound field indicators
Presence sound field
Surround left
sound field
Surround back sound field
42
En
Sound field programs
Category of the
program
MOVIE
P.ROOM SIZE
S. ROOM SIZE
S.INIT. DLY
SB INI. DLY
Listening position
Surround right
sound field
• Sound field programs cannot be selected when the component
connected to the MULTI CH INPUT jacks is selected as the
input source (see page 38).
• When you play back DTS 96/24 sources with any sound field
program, this unit applies the selected program without
activating the DTS 96/24 decoder.
• Sampling frequencies higher than 48 kHz are sampled down to
48 kHz or lower and then sound field programs are applied.
• When the sampling frequency of the input sources are higher
than 96 kHz, this unit does not apply any sound field programs.
Name of the
Created sound
program
fields
Sci-Fi
SB ROOM SIZE
DIALG. LIFT
CINEMA DSP
or
HiFi DSP
Program description
Advertisement
Table of Contents
