Table of Contents
Advertisement
Quick start guide
Case C: "I want to listen to a music program of the
FM/AM radio station..."
Press F SCENE4 (or
A SCENE4) to select "Radio
Listening".
Notes
• To use the "Radio Listening" template (Case C), you have
to tune into the desired radio station. See pages 50 to 52
for the tuning information.
• To achieve the best possible reception, orient the
connected AM loop antenna, or adjust the position of the
end of the indoor FM antenna.
y
If you cannot find the desired situation, you can select and change
the assigned SCENE template for the SCENE buttons. See
page 33 for details.
■ After using this unit...
Press A MAIN ZONE ON/OFF to set this unit to
the standby mode.
This unit is set to the standby mode and consumes a small
amount of power in order to receive infrared signals from
the remote control. To turn on this unit from the standby
mode, press the desired F SCENE buttons (or
A SCENE) or A MAIN ZONE ON/OFF on the front
panel (or I POWER on the remote control). See page 25
for details.
10
En
What do you want to do with this
unit?
■ Customizing the SCENE templates
• Using various SCENE templates
• Creating your original SCENE templates
■ Using various input sources
• Basic controls of this unit
• Enjoying FM/AM radio programs
• Using your iPod with this unit
■ Using various sound features
• Using various sound field programs
• Using the pure direct mode for high fidelity
sound
• Customizing the sound field programs
■ Adjusting the parameters of this unit
• Automatically optimizing the speaker
parameters for your listening room
(AUTO SETUP)
• Manually adjusting various parameters of
this unit
• Setting the remote control
• Adjusting the advanced parameters
■ Additional feature
Automatically turning off this unit
☞ P. 33
☞ P. 36
☞ P. 37
☞ P. 50
☞ P. 56
☞ P. 42
☞ P. 48
☞ P. 59
☞ P. 28
☞ P. 69
☞ P. 83
☞ P. 99
☞ P. 41
Advertisement
Table of Contents
