Connecting Other Components; Connecting A Dvd Player - Yamaha RX-V861 Owner's Manual

Connecting other components

Make sure that this unit and other
components are unplugged from the
AC wall outlets.
Notes
• When "VIDEO CONV." is set to "OFF" (see page 79), be sure
to make the same type of video connections as those made for
your TV (see page 18). For example, if you connected your TV
to the VIDEO MONITOR OUT jack of this unit, connect your
other components to the VIDEO jacks.

■ Connecting a DVD player

C
Coaxial out
Optical out
HDMI out
Audio out
R
O
L
R
DVD
DVD IN1
DVD 3
HDMI
DVD
6
DIGITAL INPUT
• When "VIDEO CONV." is set to "ON" (see page 79), the
converted video signals are output only at the MONITOR OUT
jacks. To record a source, make the same type of video
connections between each component.
• To make a digital connection to a component other than the
default component assigned to each DIGITAL INPUT or
DIGITAL OUTPUT jack, select the corresponding setting for
"OPTICAL OUT", "OPTICAL IN", or "COAXIAL IN" in "I/O
ASSIGNMENT" (see page 76).
• If you connect your DVD player to both the DIGITAL INPUT
(OPTICAL) and the DIGITAL INPUT (COAXIAL) jacks,
priority is given to the signals input at the DIGITAL INPUT
(COAXIAL) jack.
DVD player
S-video out
Video out
Component
video out
L
P P Y
R B
AUDIO
DVD
A
DVD
COMPONENT VIDEO
indicates recommended connections
indicates alternative connections
Connections
V
S
VIDEO
19
En