Changing The Speaker Impedance Setting (Sp Imp.); Selecting The Remote Control Id (Remote Id); Changing The Fm/Am Tuning Frequency Setting (Tu); Switching The Video Signal Type (Tv Format) - Yamaha RX-V485 Owner's Manual

Changing the speaker impedance setting (SP IMP.)

(U.S.A. and Canada models only)
LINK MASTER STEREO TUNED ZONE
SLEEP PARTY 2 A
OUT 2 Hi -R es ENHANCER YPAO VOL. A- DRC
ECO
SP IMP.••8¬MIN
Change the unit's speaker impedance settings depending on the impedance of the
speakers connected.
ADVANCED SETUP menu
"SP IMP."
Settings
6 Ω MIN Select this option when you connect 6-ohm speakers to the unit.
8 Ω MIN Select this option when you connect 8-ohm or higher speakers to the unit.

Selecting the remote control ID (REMOTE ID)

LINK MASTER STEREO TUNED ZONE
2 A
SLEEP PARTY
OUT 2
Hi -R es ENHANCER YPAO VOL. A- DRC
ECO
REMOTE ID••ID1
Change the unit's remote control ID so that it matches the remote control's ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with
a unique remote control ID for its corresponding receiver.
ADVANCED SETUP menu
"REMOTE ID"
Settings
ID1, ID2
Changing the remote control ID of the remote control
• To select ID1, while holding down the left cursor key, hold down SCENE (BD/DVD)
for 5 seconds.
• To select ID2, while holding down the left cursor key, hold down SCENE (TV) for 5
seconds.
3 B
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
3 B
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR

Changing the FM/AM tuning frequency setting (TU)

(Asia, Taiwan, Brazil, General, and Central and South America models only)
LINK MASTER
OUT 2 Hi -R es ENHANCER
ECO
TU••••FM50/AM9
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
ADVANCED SETUP menu
"TU"
Settings
Select this when you want to adjust the FM frequency by 100-kHz steps
FM100/AM10
and AM by 10-kHz steps.
Select this when you want to adjust the FM frequency by 50-kHz steps
FM50/AM9
and AM by 9-kHz steps.

Switching the video signal type (TV FORMAT)

LINK MASTER
OUT 2 Hi -R es ENHANCER
ECO
TV FORMAT•NTSC
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
ADVANCED SETUP menu
"TV FORMAT"
Settings
NTSC, PAL
116
En
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR
STEREO TUNED ZONE
SLEEP PARTY 2 A 3 B
YPAO VOL. A- DRC
VOL. MUTE VIRTUAL
FPL FPR
SL SW SR
SBL SB SBR