Table of Contents
Advertisement
■ Default macro functions
Pressing
macro button
STANDBY
POWER
PHONO
MULCH CH IN
V - AUX/DOCK
TUNER
MD/CD-R
CD
DTV/CBL
DVR
VCR
DVD
*1
You can turn on some components (including Yamaha components) connected to this unit by connecting them to the AC OUTLETS
on the rear panel of this unit. Power control may not be synchronized with this unit depending on the component.
For details, refer to the operating instructions for the connected component.
*2
When the remote control code for your TV is set up for either DTV/CBL or PHONO (see page 86), you can turn on the power of your
TV without selecting an input source. The remote control code set up for DTV/CBL takes priority over the one for PHONO.
*3
When TUNER is selected as the input source, this unit plays the last station received before the unit was set in the standby mode.
*4
Playback can be started for any Yamaha remote control-compatible CD player, CD recorder, DVD player, or DVD recorder. When
using macros to operate other components, you will need to program the play button on the input area of that component (see
page 88) or set a remote control code (see page 86).
To automatically transmit these signals in order
First
Second
STANDBY
—
(*1)
POWER
POWER
TV
PHONO
MULCH CH IN
V - AUX/DOCK
TUNER
POWER
MD/CD-R
(*1)
CD
DTV/CBL
DVR
VCR
DVD
Remote control features
Third
—
(*2)
—
—
—
—
—
—
(*3)
—
(MD/CD-R area) (*4)
(CD area) (*4)
—
(DVR area) (*4)
(VCR area) (*4)
(DVD area) (*4)
91
En
Advertisement
Table of Contents
