Lamp replacement - vanity mirror
lighting
The vanity mirror's lamps are fitted inside the
lamp lenses.
Removal of lamp lens
1. Insert a screwdriver under the lamp lens
and gently prize up the lug on the edge.
2. Carefully detach and lift aside the lamp
lens.
3. Use needle-nose pliers to pull the bulb
straight out to the side and replace with a
new one. Note! - Do not pinch hard with
the pliers. Otherwise the lamp lens could
then be crushed.
Attaching the lamp lens
1. Refit the lamp lens.
2. Press it into place.
Related information
•
Lamps - specifications (p. 343)
10 Maintenance and service
Lamps - specifications
The specifications apply to bulbs. When
replacing LED and Xenon lamps, please refer
to a workshop.
Lighting
W
Dipped beam,
55
halogen
Main beam, Halo-
65
gen
Extra main beam,
65
ABL
Front direction
24
indicators
Courtesy lighting
front
Glovebox lighting
Vanity mirror
1,2
lighting
Cargo area light-
ing
Number plate
lighting
Direction indica-
21
tors, rear
10
Type
A
H7 LL
H9
H9
PY24W
3
T10 Socket
W2.1x9.5d
5
Socket SV8.5
Length 43 mm
T5 Socket
W2x4.6d
5
Socket SV8.5
Length 43 mm
5
C5W LL
PY21W LL
343