Table of Contents
Advertisement
10 Maintenance and service
Lamp replacement - vanity mirror
lighting
The vanity mirror's lamps are fitted inside the
lamp lenses.
10
Removal of lamp lens
1. Insert a screwdriver under the lamp lens
and gently prize up the lug on the edge.
2. Carefully detach and lift aside the lamp
lens.
3. Use needle-nose pliers to pull the bulb
straight out to the side and replace with a
new one. Note! - Do not pinch hard with
the pliers. Otherwise the lamp lens could
then be crushed.
Attaching the lamp lens
1. Refit the lamp lens.
2. Press it into place.
358
Related information
•
Lamps - specifications (p. 358)
Lamps - specifications
The specifications apply to bulbs. When
replacing LED and Xenon lamps, please refer
to a workshop.
Lighting
W
A
Dipped beam,
55
halogen
Main beam, Halo-
65
gen
Extra main beam,
65
ABL
Front direction
24
indicators
Courtesy lighting
3
T10 Socket
front
W2.1x9.5d
Glovebox lighting
5
Socket SV8.5
Length 43 mm
Vanity mirror
1,2
T5 Socket
lighting
Cargo area light-
5
Socket SV8.5
ing
Length 43 mm
Number plate
5
lighting
Direction indica-
21
PY21W LL
tors, rear
Type
H7 LL
H9
H9
PY24W
W2x4.6d
C5W LL
Advertisement
Table of Contents
