Cruise Control* - Managing Speed; Cruise Control* Temporary Deactivation And Standby Mode - Volvo V60 Plug-In Hybrid Owner's Manual

07 Driver support

Cruise control* - managing speed

The cruise control (CC – Cruise Control) helps
the driver to maintain an even speed. It is
possible to activate, set or change the speed.
Activating and setting the speed
To enable cruise control:
•
Press the steering wheel button
> The cruise control symbol in the com-
bined instrument panel changes from
WHITE to GREY and shows that the
cruise control is in standby mode.
To activate cruise control:
•
At the required speed - press the steering
wheel button or
> The current speed is stored in the mem-
ory and the combined instrument panel's
marking (5) is illuminated/turns WHITE at
the selected speed.
NOTE
Cruise Control cannot be enabled at
speeds below 30 km/h.
07
Changing the speed
To change the stored speed:
•
Adjust with short presses on
every press gives +/- 5 km/h. The last
presses made are stored in the memory.
To adjust +/- 1 km/h:
*
188
Option/accessory, for more information, see Introduction.
•
Hold down the button and release it at
the required speed.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the cruise control setting - the car
returns to the set speed when the accelerator
pedal is released.
NOTE
If any of the Cruise Control buttons are
held depressed for several minutes then it
is blocked and deactivated. To be able to
reactivate Cruise Control, the car must be
stopped and the engine restarted.
Related information
.
•
Cruise control* (p. 187)
•
Cruise control* temporary deactivation
and standby mode (p. 188)
•
Cruise control* - resume set speed (p.
189)
•
Cruise control* - deactivate (p. 189)
or -
Cruise control* temporary
deactivation and standby mode
The cruise control (CC – Cruise Control) helps
the driver to maintain an even speed. The
function can be temporarily deactivated and
set in standby mode.
Temporary deactivation - standby mode
To temporarily disengage cruise control and
set it in standby mode:
•
Press the steering wheel button
> The combined instrument panel's mark-
ing (5) and the symbol (6) change colour
from WHITE to GREY.
Automatic standby mode
Cruise control is temporarily disengaged and
set in standby mode if:
•
wheels lose traction
•
the foot brake is used
•
speed falls below approx. 30 km/h
•
the gear selector is moved to neutral
position (automatic gearbox)
•
the driver maintains a speed higher than
the set speed for longer than 1 minute.
The driver must then regulate the speed.
Related information
•
Cruise control* (p. 187)
•
Cruise control* - managing speed (p. 188)
.