Blis - Symbols And Messages - Volvo V60 Plug-In Hybrid Owner's Manual

07 Driver support
||
vehicle/object that is blocking, at which the
blind sector rapidly decreases.
Examples of further limitations:
•
Dirt, ice and snow covering sensors can
reduce functionality and make it impossi-
ble to provide warnings. CTA cannot
detect hazards if it is covered.
•
Do not affix any objects, tape or labels in
the area of the sensors.
•
CTA is deactivated when a trailer is con-
nected to the car's electrical system.
IMPORTANT
Repair of the BLIS and CTA functions'
components or repainting the bumpers
must only be performed by a workshop -
an authorised Volvo workshop is recom-
mended.
Maintenance
07
*
246
Option/accessory, for more information, see Introduction.
Sensor location.
The sensors for the CTA functions are located
inside the rear wing/bumper on each side of
the car.
•
To ensure optimal functionality the areas
in front of the sensors must be kept
clean.
Related information
•
BLIS* (Blind Spot Information System) (p.
242)
•
BLIS - symbols and messages (p. 246)

BLIS - symbols and messages

In situations where the BLIS (p. 242) and CTA
(p. 244) functions fail or are interrupted, the
combined instrument panel may show a sym-
bol, supplemented by an explanatory mes-
sage. Follow any recommendation given.
Message examples:
Message Specification
CTA OFF CTA is manually switched
off - BLIS is active.
BLIS and
BLIS and CTA are tempo-
CTA OFF rarily non-operational
because a trailer is con-
Trailer
attached nected to the car's electri-
cal system.
BLIS and
BLIS and CTA are non-
CTA Serv- operational.
ice required
•
Visit a workshop if the
message remains - an
authorised Volvo work-
shop is recommended.
A text message can be acknowledged by
briefly pressing the OK button on the direc-
tion indicator stalk.
Related information
•
BLIS* (Blind Spot Information System) (p.
242)