Trip Computer - Trip Statistics - Volvo V60 Plug-In Hybrid Owner's Manual

03 Instruments and controls
||
puter shows the corresponding speed in
km/h and vice versa.
Resetting
Trip meter:
1. Turn with the thumbwheel to the heading
combination containing the trip meter to
be reset.
03
2. Give a long press on RESET - selected
trip meter is zeroed.
Average speed & Average consumption:
Trip computer reset
1. Select function
activate with OK.
2. Select one of the following options with
the thumbwheel and activate with OK:
•
l/100 km
•
km/h
•
Reset both
3. Finish with RESET.
Change unit
You can change unit (km/miles) for distance
and speed in the menu system My Car, see
MY CAR (p. 105).
NOTE
In addition to in the trip computer, these
units are also changed in Volvo's naviga-
tion system*.
The figure is schematic - layout may vary depending on car model or updated software.
20
*
112
Option/accessory, for more information, see Introduction.
Related information
•
Trip computer - trip statistics* (p. 112)
and

Trip computer - trip statistics*

Information is stored about completed trips
containing average fuel consumption and
average speed, which can be viewed in the
centre console's screen as a bar chart.
Function
Trip statistics 20 .
Fuel and electricity consumption are shown in
separate graphs. Electricity consumption is
"net" consumption, i.e. energy consumed
minus regenerated energy created during
braking.
Each bar symbolises 1 km or 10 km driven
distance, depending on the scale selected -
the bar at the far right shows the value for the
current kilometre or 10 km.
Using the TUNE control, the scale for the
bars can be changed between 1 km and