Activating And Starting The Cruise Control; Managing Speed For The Cruise Control - Volvo S90 Owner's Manual

DRIVER SUPPORT
Activating and starting the Cruise
control
Cruise control function (Cruise Control - CC)
must first be selected and activated in order to
be able to regulate the speed.
NOTE: The illustration is schematic - details may vary
depending on car model.
Active Cruise Control
Press ◀ (1) or ▶ (3) to browse to the sym-
–
bol/function (4).
> The symbol is shown and the cruise con-
trol can then be activated.
Start Cruise Control
In order to start the Cruise control from the
standby mode, the car's current speed must be
30 km/h (20 mph) or higher. The lowest speed
that can be stored is 30 km/h (20 mph).
272
–
With the symbol/function
press the steering wheel button
> Cruise Control starts and the current
speed becomes the stored speed.
NOTE
Cruise Control cannot be enabled at speeds
below 30 km/h (20 mph).
Related information
•
Cruise control (p. 271)
•

Managing speed for the Cruise control

(p. 272)
•
Deactivating/reactivating the cruise control
(p. 273)
•
Deactivating Cruise Control (p. 274)
Managing speed for the Cruise
displayed,
control
(2).
The cruise control (Cruise Control - CC) can be
set to different speeds.
NOTE: The illustration is schematic - details may vary
depending on car model.
– Change the stored speed with short or long
presses on steering wheel button
- (3):
•
Use short presses to adjust +/- 5 km/h
(+/- 5 mph) with each press.
•
Hold the button depressed to adjust
+/- 1 km/h (+/- 1 mph) and release
when the driver display's marking (4)/(6)
is at the desired speed.
> The speed set after the last press is
stored in the memory.
(1) or