D Transmit Level Setting; Voice Set Mode - Icom IC-7800 Instruction Manual

7
VOICE RECORDER FUNCTIONS
■ Sending a recorded message (continued)

D Transmit level setting

[F-6•TX LEV.] [EXIT/SET] Main dial

■ Voice set mode

[F-1•Y] [F-2•Z]
[F-4•DEF]
Select VOICE-Root or VOICE-PLAY as the menu that
appears first after pushing [F-2•VOICE].
Turn the automatic monitor function for recorded
audio contents transmission.
[F-7•T/R]
[EXIT/SET] Main dial
q Call up the Voice Recorder screen as described as
above.
w Push [F-6•TX LEV.] to select the voice memory
transmit level set condition.
e Push the desired memory channel switch, [F-1•T1]
to [F-4•T4], momentarily to transmit the contents.
• The transceiver automatically transmits.
• "
" indicator appears and the memory timer
counts down.
r Rotate the main dial to adjust the transmit voice
level.
• Hold down [F-7•DEF] for 1 second to select the default
condition.
t Push [EXIT/SET] to return to the Voice Recorder
screen.
Sets the automatic monitor function, short play and
normal recording times for Voice Recorder.
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Push [F-2•VOICE] to display the Voice Recorder
menu.
e Push [F-7•SET] to select voice set mode screen.
r Push [F-1•Y] or [F-2•Z] to select the desired item.
t Rotate main dial to set the desired condition or
value.
• Hold down [F-4•DEF] for 1 second to select the default
condition or value.
y Push [EXIT/SET] to exit the voice set mode screen.
• VOICE-Root : The voice menu appears first.
• VOICE-PLAY : Either the RX or TX voice Recorder
screen appears first.
• ON : Monitors transmitting audio automatically
when sending a recorded audio.
• OFF : Monitors transmitting audio only when the
monitor function is in use.
7-12