Voice Recorder Functions; Recording A Qso Audio; D To Start Or Stop Recording; Recording Quick Operation - Icom IC-7800 Instruction Manual

7

VOICE RECORDER FUNCTIONS

■ Recording a QSO audio

NOTE:
• Be sure to insert a CF memory card into the trans-
ceiver or connect a USB flash drive before record-
ing a QSO audio.
• DO NOT insert or connect a memory device while
recording a QSO audio to another memory device.
Otherwise the recording may interrupt.
• Once recording starts, it continues, even if the
transceiver is turned OFF and then ON again.

D To start or stop recording

[F-4•QSO REC]

■ Recording quick operation

D To start or stop recording

[EXIT/SET]
[REC]
The Voice recorder function records a QSO (communi-
cation) audio onto a memory device.
This function enables you to record both received and
transmitted audio, a QSO with a DX'pedition, and play-
back the recorded audio after the QSO.
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Push [F-2•VOICE] to display the Voice Recorder
menu.
e Hold down [F-4•QSO REC] for 1 second to start
voice recording.
• The " " indicator appears and either the "
indicator blinks.
• Recording is continuous until you manually stop record-
ing, or the memory device becomes full.
• If the recording file's content reaches 2GB, the trans-
ceiver automatically creates a new file, and continues
recording.
• The " " indicator appears instead of the " " indicator
while recording is paused.
r Hold down [F-4•QSO REC] for 1 second to stop re-
cording.
• The " " indicator disappears and the "
dicator stops blinking.
t Push [EXIT/SET] to exit the Voice Recorder
screen.
✓
Convenient!
When the PTT Automatic Recording function is set to
ON in the Voice set mode, the recording automatically
starts when you push [PTT]. (p. 7-14)
q Hold down [REC] for 1 second to start voice record-
ing.
• The " " indicator appears and either the "
indicator blinks.
w Hold down [REC] for 1 second again to stop record-
ing.
7-2
" or " "
" or " " in-
" or " "