Memory Names; D Editing (Programming) Memory Names; Memory Clearing - Icom IC-7800 Instruction Manual

8
MEMORY OPERATION

■ Memory names

D Editing (programming) memory names

[ABC]/[abc] [123]/[Symbol]
[F-1•Ω] [F-2•≈] [F-4•SPACE]

■ Memory clearing

[F-5•CLR]
(CLR)
[F-3•DEL] Keypad
Beep
Beep
Hold down for 1 second.
Beep
All memory channels (including scan edges) can be
tagged with alphanumeric names of up to 10 charac-
ters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ' ` ^ + – ✱ / . , : ; = < > ( ) [ ] { } | _
and spaces can be used.
q Push [EXIT/SET] several times to close a multi-func-
tion screen, if necessary.
w Push [F-4•MEMORY] to select memory list screen.
e Select the desired memory channel.
r Push [F-4•NAME] to edit memory channel name.
• A cursor appears and blinks.
• Memory channel names of blank channels cannot be
edited.
t Input the desired character by rotating the main dial
or by pushing the band key for number input.
• Push [ABC] or [abc] to toggle capital and small letters.
• Push [123] or [Symbol] to toggle numerals and sym-
bols.
• Push [F-1•Ω] or [F-2•≈] for cursor movement.
• Push [F-3•DEL] to delete the selected character.
• Push [F-4•SPACE] to input a space.
• Pushing the transceiver's keypad, [0]–[9], can also enter
numerals.
y Push [EXIT/SET] to input and set the name.
• The cursor disappears.
u Repeat steps e to y to program another memory
channel's name, if desired.
i Push [EXIT/SET] to exit memory list screen.
Any unnecessary memory channels can be cleared. The
cleared memory channels become blank channels.
q Select memory mode with [V/M].
w Push [F-4•MEMORY] to select memory list screen.
e Select the desired memory channel with [Y]/[Z].
r Hold down [F-5•CLR] for 1 second to clear the con-
tents.
• The programmed frequency and operating mode disap-
pear.
t To clear other memory channels, repeat steps e
and r.
8-6
~
@)