Advanced Options; Table 13 Advanced Options; Figure 13. Advanced Options - Honeywell XYR 6000 User Manual

OneWireless™ Series User Manual
5. 4BOperation
5.6. Authentication Device

Advanced options

Advanced options are non-typical configuration commands.

Figure 13. Advanced options

Table 13. Advanced Options
Item
Key server communication
method
Read tracelog flag
Write tracelog flag
Select infrared communication
port
Read TX power level
34 Honeywell Sensing and Control
Description
Determines how the PDA will receive security keys from the PC's key server manager
application. From the comm method menu select one of the following methods.
ActiveSync – Select this to receive keys over a USB connection, such as while the
PDA battery is being charged in its base.
Infrared – Select this to receive keys over the infrared port.
Important: The comm method settings match in the PC's key server manager and in
the authentication device (both must be set to Infrared or both to activesync) in order
for your PDA to receive security keys.
Not available for sensors. Used with multinodes. Reads conditional tracelog flag
value. Tracelog flags are used to enable and disable logging functionality used for
field support.
Not available for sensors. Used with multinodes. Writes conditional tracelog flag
value. Tracelog flags are used to enable and disable logging functionality used for
field support .
Overrides the detected infrared communication port detected on your PDA. If
infrared communication is not functioning, you can override the detected settings
using this option.
Reads the transmission power level of the sensor radio.
50040849
Issue 3