Honeywell XYR 6000 User Manual page 39

OneWireless™ Series User Manual
Item
FH Mode
Connection
Description
Frequency group or frequency channel selection used by the wireless network of the device. The
value must match the value set in the gateway and interface nodes to allow communication between
the device and the wireless network.
Modes:
US Channel #1
US Channel #6
US Channel #11
US Guard Bands
EU Channel #1
EU Channel #7
EU Channel #13
EU Guard Bands
US/EU Spec Div A
US/EU Spec Div B
US/EU Channel #3
US/EU Channel #10
Complete Spectrum
The first line displays one of the following connection states.
No Security Key – No security key has been deployed to the device or multinode. The user must
give a security key to the device or multinode before it will join the wireless sensor network.
No Connection – A security key exists in the device or multinode, but no connection has been
formed. The device or multinode is waiting to form a connection and will automatically retry
shortly. Users may transmit a new security key in order to force the device or multinode to
immediately retry to form a connection.
Discovering – The device is attempting to form a connection to the wireless sensor network. The
device is discovering multinodes and, if a multinode is found, will transition to the securing state.
Securing – The device is attempting to form a connection to the wireless sensor network. The
device has discovered one or two multinodes and is attempting to form a secure session. If
successful, the device will transition to the connected state.
Connected – A secure connection is formed with one or two multinodes.
The second line contains detailed state information useful for problem reporting.
50040849
Issue 3
5. 4BOperation
5.6. Authentication Device
Honeywell Sensing and Control 33