1. Manuals
  2. Brands
  3. Honeywell Manuals
  4. Transmitter
  5. oneWireless XYR 6000
  6. User manual

Honeywell OneWireless XYR 6000 User Manual

Temperature and temperature/discrete input transmitter
Hide thumbs Also See for OneWireless XYR 6000:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
OneWireless
XYR 6000 Temperature and
Temperature/Discrete Input Transmitter
User's Manual
34-XY-25-16
Revision 3
6/24/08

Advertisement

Table of Contents
loading

Related Manuals for Honeywell OneWireless XYR 6000

Summary of Contents for Honeywell OneWireless XYR 6000

  • Page 1 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 34-XY-25-16 Revision 3 6/24/08...
  • Page 2 In no event is Honeywell liable to anyone for any indirect, special or consequential damages. The information and specifications in this document are subject to change without notice.
  • Page 3 Transmitters. Mounting, installation and wiring are covered in other documents. Honeywell does not recommend using devices for critical control where there is a single point of failure or where single points of failure result in unsafe conditions. OneWireless is targeted at open loop control, supervisory control, and controls that do not have environmental or safety consequences.
  • Page 4 Honeywell Global TAC – China Phone: +86- 21-5257-4568 Mail: Honeywell (China) Co., Ltd 33/F, Tower A, City Center, 100 Zunyi Rd. Shanghai 200051, People’s Republic of China Email: Global-TAC-China@honeywell.com OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Revision 4 6/24/08...
  • Page 5 Singapore Contact: Honeywell Global TAC – South East Asia Phone: +65-6580-3500 Facsimile: +65-6580-3501 +65-6445-3033 Mail: Honeywell Private Limited Honeywell Building 17, Changi Business Park Central 1 Singapore 486073 Email: GTAC-SEA@honeywell.com Taiwan Contact: Honeywell Global TAC – Taiwan Phone: +886- 7- 536-2567...
  • Page 6 Chassis Ground: Identifies a connection to the chassis or frame of the equipment shall be bonded to Protective Earth at the source of supply in accordance with national and local electrical code requirements. continued OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Revision 4 6/24/08...
  • Page 7 ACMA and RSM. This mark is equal to the CE Mark used in the European Union. N314 directly under the logo is Honeywell’s unique supplier identification number. Revision 4OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual...
  • Page 9 Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 11: Table Of Contents

    Parameter details ........................20 OPERATION ......................21 Overview ............................21 Transmitter display modes ...........................21 Authentication Device............................21 Transmitter connection status....................22 Transmitter PV display .......................23 Transmitter quick view of parameters ..................27 Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...
  • Page 12 Procedure ................................39 Replacing antenna ........................41 Tools required ..............................41 Procedure ................................41 Replacing terminal board ......................44 When to replace..............................44 Tools required ..............................44 Procedure ................................44 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...
  • Page 13 Table 12 Advanced Options ........................35 Table 13 Battery replacement procedure ....................38 Table 14 Sensor module replacement......................40 Table 15 Antenna replacement procedure ....................42 Table 16 Terminal board replacement procedure ..................44 Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual xiii 6/24/08...
  • Page 14 Figure 7 Advanced Options .........................35 Figure 8 Battery replacement ........................38 Figure 9 Sensor module removal and replacement ..................40 Figure 10 Antenna replacement ........................43 Figure 11 Terminal board replacement .......................45 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...

  • Page 15: Introduction

    Scope The manual includes: • Details of topics that relate uniquely to the Honeywell XYR 6000 Temperature/DI Transmitter, • This manual does not cover installation, mounting, or wiring. See XYR 6000 Transmitter Quick Start Guide (document 34-XY-25-21).

  • Page 16: Figure 1 Xyr 6000 Functional Diagram

    CH 1 Board EEPROM Input Multi- Micro- Micro- CH 2 Antenna plexer processor processor EEPROM CH 3 Battery Electronics Housing Configuration Data Figure 1 XYR 6000 Functional Diagram OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...

  • Page 17: Specifications

    Lithuania Cyprus Malta Czech Republic Netherlands Denmark Norway Estonia Poland Finland Portugal France Romania Germany Slovakia Greece Slovenia Hungary Spain Iceland Sweden Ireland Switzerland Italy United Kingdom Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 18: Certifications And Approvals

    NRTL listed cable gland or seal fitting. Cable glands and seal fittings are not supplied by Honeywell. For detailed transmitter specifications see the following Specification and Model Selection Guide. • XYR 6000 Wireless Transmitter Temperature/DI (document 34-XY-03-29) OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...
  • Page 19 Remote Fixed Point–to-Point antenna(s) for this unit must be fixed and mounted on outdoor permanent structures with a separation distance between the antenna(s) of greater than 20cm and a separation distance of at least 100cm from all persons. Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...
  • Page 20 France restricts outdoor use to 10mW (10dBm) EIRP in the frequency range of 2,454-2,483.5 MHz. Installations in France must limit EIRP to 10dBm, for operating modes utilizing frequencies in the range of 2,454 – 2,483.5MHz. OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...
  • Page 21 2500 West Union Hills Drive, Phoenix, AZ 85027, USA Compliance Statement The product herewith complies with the harmonized standards listed above. Typical product line systems and configurations have been tested, for compliance. Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...
  • Page 22 Hereby, Honeywell, declares that this Multinode is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español Por medio de la presente Honeywell declara que el Multinode cumple (Spanish): con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
  • Page 23 (Swedish): överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Íslenska Hér með lýsir Honeywell yfir því að Multinode er í samræmi við (Icelandic): grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 1999/5/EC. Norsk Honeywell erklærer herved at utstyret Multinode er i samsvar med de...

  • Page 24: Authentication Device

    2.4. Honeywell European (CE) Declaration of Conformity (DoC) Authentication Device Install the Authentication Device application on any PDA having • Windows Mobile version 4.2+ • infrared port. OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...

  • Page 25: Preparation

    Restore calibration - Calibration constants for the selected channel are restored to factory defaults. • Clear calibration - Factory or user calibration constants for the selected channel are cleared. Additional calibration commands are available in Wireless Builder. Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 26: User Calibration

    Repeat steps 1 through 6 for each channel you want to calibrate. Reverse steps 3 and 4. When ready, in Wireless Builder return the transmitter’s channel to service and set Write Lock to LOCKED. OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...

  • Page 27: Table 2 User Calibration: Ohms (Sttw400 Only)

    Replace 1000 ohm wire with 0 ohm wire. Verify the PV for that channel is reading 0 ohms. • Remove calibration wiring and re-connect sensor wires. When ready, in Wireless Builder return the transmitter’s channel to service and set Write Lock to LOCKED. Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 28: Wiring For Calibration

    T/C MUST BE FLOATING (UNGROUNDED) TYPE SINGLE TWO-WIRE RTD T/C & SINGLE THREE -WIRE RTD T/C or mV Ohms Ohms (PV1) (PV1) (PV2) JUMPER WIRE T/C MUST BE FLOATING (UNGROUNDED) TYPE OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...
  • Page 29 STTW 401 T/C AND 2 DI SINGLE TWO-WIRE RTD & T/C CONNECTION T/C or mV Ohms (PV1) (PV2) (PV1) T/C MUST BE FLOATING (UNGROUNDED) TYPE 2 JUMPER WIRES Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 30: Table 3 Calibration Error Messages

    Typically this indicates that the applied calibration value was significantly different from the expected value or that the sensor is not within expected tolerances for the applied characterization. OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...

  • Page 31: Restore Calibration

    Display will say BUSY, then SUCCESS. If unsuccessful the display will show BAD_FACTORY_CALIBRATION. When ready, in Wireless Builder return the transmitter’s channel to service and set Write Lock to Locked. Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 32: Clear Calibration

    Display will say BUSY, then SUCCESS. Repeat for each channel desired. When ready, in Wireless Builder return the transmitter’s channel to service and set Write Lock to Locked. OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...

  • Page 33: Function Blocks

    The Transducer and Device blocks contain standard parameters common to all XYR 6000 transmitter models (that is, pressure, temperature, corrosion, HLAI, multi-DI) as well as temperature-specific parameters. The radio block contains parameters for communication with the wireless network. Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 34: Parameter Details

    The transmitter itself displays a few basic parameters, such as tag, serial number, device revision, build, device address, WFN ID. For more information on parameters, refer to the following documents. • OneWireless Wireless Builder User’s Guide • OneWireless Builder Parameter Reference OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...

  • Page 35: Operation

    Device Local Configuration buttons (Table 10). You can also use the PDA’s buttons. Authentication Device menus are described in section 5.6 starting on page 29. Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 36: Transmitter Connection Status

    Transmitter has connected with only one order to form a redundant connection to the Multinode. network *Use the PDA to determine your radio firmware build number (page 21). OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...

  • Page 37: Transmitter Pv Display

    If no device status is displayed then the device status is normal. Table 6 PV engineering units Engineering units Description Deg C Degrees Celsius Deg F Degrees Fahrenheit Millivolts Ohms Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 38: Table 7 Pv Status

    Radio detected loss of Restart both the radio and sensor. Communication Failure communication with If condition persists, replace sensor board over the sensor module. See page 36. inter-processor communication link. OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...
  • Page 39 INP FAIL Input 2 Failure Input 2 error Check input 2 connection. Check input 2 configuration. Restart the sensor. If condition persists, replace sensor module. See page 36. Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...
  • Page 40 Watchdog Timer Error* Sensor Watchdog Clear by warm restart of device. If Timeout. The processor condition persists contact was restarted due to Honeywell service. unexpected operation. OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...

  • Page 41: Transmitter Quick View Of Parameters

    It does not change if the application firmware changes without affecting the device description. Build Sensor firmware number Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 42: Transmitter Menu

    Secondary receive signal strength. Same as PRI RSSI. Read only. WFN ID Wireless Field Network ID. Read only. DEV ADD Device address. Read only. TX POWER Radio transmit power. Read only. OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...

  • Page 43: Authentication Device Menus

    Main menu The main menu is shown below. Details start on the next page. Figure 3 Main menu Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 44: Security And Node Deployment

    PDA, • clear the transmitter’s key and reset its configuration to factory default (such as for decommissioning). Figure 4 Security and Node Deployment OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...
  • Page 45 For more details on keys, refer to Getting Started with Honeywell OneWireless Solutions. Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual...

  • Page 46: Device Local Configuration

    Go to the upper menu level. • When changing a number value, move cursor to the left/more significant digit, then wrap around to the least significant digit. OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...

  • Page 47: Read Node Information

    Range: 0 to 65535. Build Sensor firmware and radio firmware build numbers. Radio Hardware radio type, FHSS or DSSS WFN ID: Wireless Field Network ID. Range: 0 to 255. Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...
  • Page 48 If successful, the device will transition to the connected state. Connected – A secure connection is formed with one or two multinodes. The second line contains detailed state information useful for problem reporting. OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...

  • Page 49: Advanced Options

    Read TX Power Level Reads the transmission power level of the transmitter radio. Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 50: Maintenance/Repair

    COAX CABLE ASSY, 1.0M ( 3.3 Ft) LONG, RP-TNC - N-MALE 50018110-002 COAX CABLE ASSY, 3.0M (10.0 Ft) LONG, RP-TNC - N-MALE 50018110-003 COAX CABLE ASSY, 10.0M (33.0 Ft) LONG, RP-TNC - N-MALE continued OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...

  • Page 51: Replacing Batteries

    Disconnect all power from transmitter input sources before accessing the batteries. Failure to do so could result in death or serious injury if the input terminals or wires are accidentally touched. Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 52: Table 13 Battery Replacement Procedure

    Eagle Picher PT-2300H • Tadiran TL-5930/s • Honeywell p/n 50026010-001 (Two 3.6V lithium thionyl chloride batteries) (1 transmitter) • Honeywell p/n 50026010-002 (Four 3.6V lithium thionyl chloride batteries) (2 transmitters) • Honeywell p/n 50026010-003 (Ten 3.6V lithium thionyl chloride batteries) (5 transmitters) Loosen the M3 locking set screw on the battery end-cap (opposite end from display).

  • Page 53: Replacing Sensor Module

    (3.5 – 5.3 Lb-in). Re-connect battery connector. Honeywell recommends lubricating the end cap O-ring with a Silicone Grease such as Dow Corning #55 or equivalent before replacing the end cap. Screw the end cap back on and tighten the M3 locking screw.

  • Page 54: Table 14 Sensor Module Replacement

    Table 14 Sensor module replacement Step Action Honeywell recommends that the transmitter be removed from service and moved to a clean area before servicing. Loosen the M3 locking set screw on the display end-cap. See item 1 in Figure 9. Unscrew and remove the end cap.

  • Page 55: Replacing Antenna

    If electrostatically charged, discharge of the antenna shroud to a person or a tool could possibly ignite a surrounding hazardous atmosphere. Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 56: Table 15 Antenna Replacement Procedure

    See items 2 in Figure 10. Torque screws to 0,4 – 0,6 N-M (3.5 – 5.3 Lb- in). Replace the front end cap. Honeywell recommends lubricating the front end cap O-ring with a Silicone Grease such as Dow Corning #55 or equivalent before replacing the end cap.

  • Page 57: Figure 10 Antenna Replacement

    6. Maintenance/Repair 6.4. Replacing antenna Antenna connector Figure 10 Antenna replacement Rev. 3 OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual 6/24/08...

  • Page 58: Replacing Terminal Board

    Table 16 Terminal board replacement procedure Step Action Honeywell recommends that the transmitter be removed from service and moved to a clean area before servicing. SHOCK HAZARD Depending on your installation, transmitter input wiring sources may contain high voltage.

  • Page 59: Figure 11 Terminal Board Replacement

    (3.5 – 5.3 Lb-in). Re-connect battery connector. Honeywell recommends lubricating the end cap O-ring with a Silicone Grease such as Dow Corning #55 or equivalent before replacing the end cap. Screw the end cap back on and tighten the M3 locking screw.
  • Page 60 6. Maintenance/Repair 6.5. Replacing terminal board OneWireless XYR 6000 Temperature and Temperature/Discrete Input Transmitter User's Manual Rev. 3 6/24/08...

Table of Contents