4 Replacement Procedures
4.10 QI button assembly / PC card slot brace
4.10.1 QI button assembly
Removing the QI button assembly
The following describes the procedure for removing the QI button assembly. (See Figure 4-
14.)
1. Remove the following screw securing the QI button assembly and remove the QI
button assembly.
• M2.5x4.0B
M2.5x4.0B FLAT BIND
Installing the QI button assembly
The following describes the procedure for installing the QI button assembly. (See Figure 4-
14.)
1. Install the QI button assembly to the slot of bottom cover assembly and secure it
with the following screw.
• M2.5x4.0B
Note: When installing the QI button assembly, be sure to fit the button portion to the slot
of bottom cover assembly.
4-26
4.10 QI button assembly / PC card slot brace
FLAT BIND screw
Figure 4-14 Removing the QI button assembly
FLAT BIND screw
[CONFIDENTIAL]
x1
QI button assembly
x1
TECRA M4 Maintenance Manual (960-521)