Toshiba Tecra M4 Maintenance Manual page 221

3 Tests and Diagnostics
13. Display
This group of options configures the computer's display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected
LCD +Analog RGB Selects both the internal LCD and the external CRT for
System LCD only
NOTE: When starting the computer in Standby or Hibernation, the last configuration is
saved. If data does not appear on the display you are using after starting in
Standby or Hibernation, press Fn+F5 to change the active display device.
When an external CRT display, which does not support SVGA mode is connected
and "LCD+AnalogRGB" is selected, the external display is not displayed.
(b) LCD Display Stretch
LCD Display Stretch enables or disables a larger display area of the screen.
Enabled
Disabled
(c) TV type
This option allows you to select the type of TV.
NTSC (Japan)
NTSC (US)
PAL
14. Peripheral
Use this option to select the peripheral's mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled
Disabled
3-102
Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
simultaneous display.
Selects only internal LCD display even if the external
monitor is connected.
Enables the LCD display stretch feature. (Default)
Disables the LCD display stretch feature.
; TV in Japanese system
; TV in the U.S. system
; TV in Europe etc. system
Enables the touch pad. (Default)
Disables the touch pad.
[ CONFIDENTIAL] TECRA M4 Maintenance Manual (960-521)
3.30 SETUP