Hinge Switch Board - Toshiba Tecra M4 Maintenance Manual

Hide thumbs Also See for Tecra M4:

Table of Contents

4.31 Hinge Switch Board

Removing the hinge switch board

The following describes the procedure for removing the hinge switch board. (See Figure 4-

1. Remove the following screws and hinge switch board.

2. Remove the plate placed under the hinge switch board.

Hinge switch board

Installing the hinge switch board

The following describes the procedure for installing hinge switch board. (See Figure 4-48.)

1. Install the plate fitting to the bosses on the hinge assembly.

2. Install the hinge switch board and secure it with the following screws.

TECRA M4 Maintenance Manual (960-521)

FLAT BIND screw

Figure 4-48 Removing the hinge switch board

FLAT BIND screw

[CONFIDENTIAL]

4 Replacement Procedures

Table of Contents