Mic (L) Cable Guide - Toshiba Tecra M4 Maintenance Manual

Hide thumbs Also See for Tecra M4:

Table of Contents

4.18 Mic (L) cable guide

Removing the Mic (L) cable guide

The following describes the procedure for removing the Mic (L) cable guide. (See Figure 4-

1. Disconnect the Mic (L) cable from the connector CN6060 on the system board and

pull it out from the Mic (L) cable guide.

2. Disconnect the HDD cable from the connector CN1900 on the system board.

3. Remove the following screws and Mic (L) cable guide.

TECRA M4 Maintenance Manual (960-521)

FLAT BIND screw

Mic. L cable

Figure 4-28 Removing the Mic (L) cable guide

[CONFIDENTIAL]

4 Replacement Procedures

Mic. L cable guide

Table of Contents