Toshiba Tecra M4 Maintenance Manual page 260

4.12 MDC / Modem cable
5. Remove the following screw and disconnect the drain cable 1 from the stud of
system board.
• M2.0x4.0Z
• M2.0x4.0B
6. Peel off the glass tape and open the insulators and pull out the Modem cable from
the insulators.
7. Remove the following screw and disconnect the drain cable 2 from the stud of hinge
assembly.
• M2.0x4.0Z
8. Disconnect and remove the Modem cable from the connector CN3001 on the system
board.
Modem cable
CN3001
M2.0x4.0Z
BIND
Drain cable 2
TECRA M4 Maintenance Manual (960-521)
BIND screw
or
LH STICK
BIND screw
Glass Tape
Insulator
Figure 4-18 Removing the Modem cable
[CONFIDENTIAL]
4 Replacement Procedures
x1
x1
x1
M2.0x4.0Z BIND
or
M2.0x4.0B LH STICK
Drain cable 1
4-31