Hdd - Toshiba Tecra M4 Maintenance Manual

Hide thumbs Also See for Tecra M4:

Table of Contents

4.5 HDD

Removing the HDD

The following describes the procedure for removing the HDD. (See Figure 4-5 and 4-6.)

Caution: Take care not to press on the top or bottom of the HDD. Pressure may cause

data loss or damage to the device.

1. Turn the computer upside down.

2. Loosen the screw (with e-ring) fixing the HDD slot cover and remove the HDD slot

3. Pull out the HDD assembly from the connector CN1900 of HDD cable.

Note: When removing the HDD assembly, be careful not to tear the laminate. If the

laminate is torn, replace it with a new one.

HDD slot cover

HDD assembly

TECRA M4 Maintenance Manual (960-521)

Screw (with e-ring)

Figure 4-5 Removing the HDD FPC

[CONFIDENTIAL]

4 Replacement Procedures

Table of Contents