Toshiba Tecra M4 Maintenance Manual page 222

3.30 SETUP
(b) Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP
Std. Bi-Direct.
15. LEGACY EMULATION
(a) USB KB/Mouse Legacy Emulation
This option sets the Legacy support condition of the USB keyboard and the USB
mouse.
Enabled
Disabled
(b) USB-FDD Legacy Emulation
This option sets the Legacy support condition of the USB floppy disk drive.
When a computer is FDD built-in model, this option is not displayed.
Enabled
Disabled
(c) USB Memory BIOS Support Type
This option sets the type of the USB memory as a startup device.
HDD
Sets the type of the USB memory to be equivalent to the HDD
FDD
16. PCI LAN
This option sets the Enable / Disable of the built-in LAN functions.
Enabled
Disabled
TECRA M4 Maintenance Manual (960-521)
Sets the port mode to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)
This setting should be used with some other parallel devices.
Enables
LEGACY
USB keyboard/USB mouse are available without the driver.
Disables LEGACY support
Enables
LEGACY
USB floppy disk is available without the driver.
Disables LEGACY support
(Based on the [HDD] order in the [Boot Priority Options] item. The
order with respected to the other HDD can be set in the [HDD Priority
Options] item.)
Sets the type of the USB memory to be equivalent to the FDD.
(Based on the [HDD] order in the [Boot Priority Options] item.)
Enables built-in LAN functions. (Default)
Disables built-in LAN functions.
support. (Default)
support. (Default)
[ CONFIDENTIAL]
3 Tests and Diagnostics
(Default).
3-103