Lcd Harnesses & Wireless Lan/Bluetooth Antennas - Toshiba Tecra M4 Maintenance Manual

4 Replacement Procedures
4.30 LCD harnesses & Wireless LAN/Bluetooth antennas
Removing the LCD harnesses & Wireless LAN/Bluetooth antennas
The following describes the procedure for removing the LCD harness & wireless
LAN/Bluetooth antennas. (See Figure 4-45 and 4-46.)
1. Pull out the wireless LAN antenna cables / Bluetooth antenna cable from the guide.
2. Remove the following screws and LCD harness holder.
• M2.5x2.8B
3. Remove the following screws and digitizer harness holder.
• Unique screw
• M2.5x6.0S
4. Remove the following screws securing the hinge assembly.
• M2.5x6.0B
• M2.5x6.0S
5. Remove the hinge rear cover from the hinge assembly.
4-72
4.30 LCD harnesses & Wireless LAN/Bluetooth antennas
FLAT BIND screw
CPU stud screw
PSP TIGHT screw
FLAT BIND screw
PSP TIGHT screw
[CONFIDENTIAL] TECRA M4 Maintenance Manual (960-521)
x1
x1
x1
x1
x1