Understanding the printer menus
Use
Network Mode
BSS Type
Infrastructure
Ad hoc
Compatibility
802.11b/g
802.11b/g/n
Choose Network
View Signal Quality
View Security Mode
AppleTalk menu
Note: This menu is available only in printer models connected to a wired network or when an optional network card
is installed.
To access the menu, navigate to any of the following:
•
Network/Ports > Standard Network > Standard Network Setup > AppleTalk
•
Network/Ports > Network Setup [x] > AppleTalk
Use
Activate
Yes
No
View Name
View Address
Set Zone
[list of zones available on the network]
To
Specify the network mode.
Notes:
•
Infrastructure is the factory default setting. This lets the printer
access a network using an access point.
•
Ad hoc configures a wireless connection directly between the
printer and a computer.
Specify the wireless standard for the wireless network.
Note: The 802.11b/g/n is the factory default setting.
Select an available network for the printer to use.
View the quality of the wireless connection.
View the encryption method for the wireless network.
To
Enable or disable AppleTalk support.
Note: Yes is the factory default setting.
Show the assigned AppleTalk name.
Note: The name can be changed only from the Embedded Web Server.
Show the assigned AppleTalk address.
Note: The address can be changed only from the Embedded Web Server.
Provide a list of AppleTalk zones available on the network.
Note: The factory default setting is the default zone for the network. If no
default zone exists, then the zone marked with an asterisk (*) is the default
setting.
137