Lexmark XM1140 User Manual page 162

Understanding the printer menus
Use
Rings to Answer
1–25
Auto Reduction
On
Off
Paper Source
Auto
Tray [x]
Multi‑Purpose Feeder
Manual Feeder
Sides (Duplex)
Off
On
Separator Sheets
Off
Before Job
After Job
Separator Sheet Source
Tray [x]
Manual Feeder
Fax Footer
On
Off
Max Speed
2400
4800
9600
14400
33600
Fax Forwarding
Print
Print and Forward
Forward
Forward to
Fax
E‑mail
FTP
LDSS
eSF
To
Specify the number of rings before answering an incoming fax job.
Note: 3 is the factory default setting.
Scale an incoming fax job so that it fits the size of the paper loaded in the designated
fax source.
Note: On is the factory default setting.
Specify the paper source for printing incoming fax jobs.
Note: Auto is the factory default setting.
Enable two‑sided (duplex) printing for incoming fax jobs.
Notes:
• Off is the factory default setting.
•
This menu item appears only when a print duplexer is installed.
Enable the printer to include separator sheets for incoming fax jobs.
Note: Off is the factory default setting.
Specify where the printer will pick the separator sheet.
Note: Tray 1 is the factory default setting.
Print the transmission information at the bottom of each page from a received fax.
Note: Off is the factory default setting.
Specify the maximum speed in baud at which faxes are received.
Note: 33600 is the factory default setting.
Enable forwarding of received faxes to another recipient.
Note: Print is the factory default setting.
Specify the type of recipient to which faxes will be forwarded.
Notes:
• Fax is the factory default setting.
•
This menu item is available only from the Embedded Web Server.
162