Lexmark XM1140 User Manual page 43

Additional printer setup
2
Install the printer driver.
a
Obtain a copy of the software installer package.
•
From the Software CD that came with your printer
•
From our Web site:
Go to http://support.lexmark.com, and then navigate to:
SUPPORT & DOWNLOAD > select your printer > select your operating system
b
Double‑click the software installer package.
Wait for the installation dialog to appear.
If you are using the Software CD and the installation dialog does not appear, then do the following:
In Windows 8
From the Search charm type run, and then navigate to:
Apps list > Run > type D:\setup.exe > OK
In Windows 7 or earlier
1
Click or click Start, and then click Run.
2
In the Start Search or Run dialog, type D:\setup.exe.
3
Press Enter or click OK.
Note: D is the letter of your CD or DVD drive.
c
Click Install.
d
Follow the instructions on the computer screen.
e
Select Advanced, and then click Continue.
f
From the Configure Printer Connection dialog, select a port.
g
If the port is not in the list, then click Refresh or navigate to:
Add port > select a port type > enter the necessary information > OK
h
Click Continue > Finish.
3
Set the COM port parameters.
After installing the printer driver, set the serial parameters in the COM port assigned to the printer driver.
Note: Make sure the serial parameters in the COM port match the serial parameters you set in the printer.
a
Open Device Manager.
In Windows 8
From the Search charm type run, and then navigate to:
Apps list > Run > type devmgmt.msc > OK
In Windows 7 or earlier
1
Click or click Start, and then click Run.
2
In the Start Search or Run dialog, type devmgmt.msc.
3
Press Enter or click OK.
b
Double‑click Ports (COM & LPT) to expand the list of available ports.
43