Lexmark XM1140 User Manual page 176

Understanding the printer menus
Sides (Duplex)
1 sided
2 sided
Duplex Binding
Long Edge
Short Edge
Paper Saver Orientation
Auto
Landscape
Portrait
Paper Saver
Off
2‑Up
3‑Up
4‑Up
6‑Up
9‑Up
12‑Up
16‑Up
Paper Saver Border
None
Solid
Paper Saver Ordering
Horizontal
Reverse Horizontal
Reverse Vertical
Vertical
Separator Sheets
Off
Between Copies
Between Jobs
Between Pages
Separator Sheet Source
Tray [x]
Manual Feeder
Specify whether prints are on one side or on both sides of the page.
Note: "1 sided" is the factory default setting.
Define binding for duplexed pages in relation to the page orientation of the printed document.
Notes:
•
Long Edge is the factory default setting. This assumes binding along the long edge of the
page (left edge for portrait and top edge for landscape).
•
Short Edge assumes binding along the short edge of the page (top edge for portrait and
left edge for landscape).
Specify the orientation of a multiple‑page document.
Note: Auto is the factory default setting. The printer chooses between portrait and landscape.
Specify that multiple‑page images be printed on one side of a paper.
Notes:
• Off is the factory default setting.
•
The number selected is the number of page images that will print per side.
Print a border on each page image.
Note: None is the factory default setting.
Specify the positioning of multiple‑page images.
Notes:
•
Horizontal is the factory default setting.
• Positioning depends on the number of page images and whether they are in portrait or in
landscape orientation.
Specify whether blank separator sheets are inserted.
Notes:
•
Off is the factory default setting.
•
Between Copies inserts a blank sheet between each copy of a print job if Collate is set to
"1,2,3 ‑ 1,2,3". If Collate is set to "1,1,1 ‑ 2,2,2", then a blank page is inserted between
each set of printed pages, such as after all page 1's and after all page 2's.
• Between Jobs inserts a blank sheet between print jobs.
•
Between Pages inserts a blank sheet between each page of the print job. This setting is
useful when printing transparencies or when inserting blank pages in a document .
Specify the paper source for separator sheets.
Note: Tray 1 is the factory default setting.
176