Recalculating A Route; Adding Via Points; Adding A Detour - Garmin Quest 2 Owner's Manual

Recalculating a Route

The Quest 2 will automatically recalculate your route if you
stray from the current route. You can also prompt the Quest 2 to
recalculate your route. For example, if you change your route
preference (page 37), you can recalculate your route based on your
new preference.
To recalculate your route:
1.. Press.and.hold.the.MeNU.key..
2.. Highlight.Recalculate.and.press.OK..

Adding a Detour

When you are navigating a route, you might need to take a detour
to avoid a roadblock or construction. After you select a detour
distance, your Quest 2 calculates a new route and provides you
with new driving instructions. The detour is saved until you stop
the current navigation or until you turn off the unit.
To set a detour:
1.. Press.and.hold.the.MeNU.key..
2.. Highlight.Detour.and.press.OK..
3.. Highlight.a.detour.distance.and.press.OK..
Quest 2 Owner's Manual
®
b o
asIc peratIon
Your Quest 2 makes every possible attempt to get you back on the
original route at your requested distance; however, the distance
may be longer if no other roads can take you back to your original
route. Sometimes, the route you are currently taking might be the
only reasonable option. If so, you will not be able to take a detour.

Adding Via Points

Via points are extra stops you make on the way to your final
destination. You can add stops to the route you are currently
navigating, to the route you are planning, or to a route that you
have previously saved.
To add via points to a saved route:
1.. Press.and.hold.the.MeNU.key..
2.. Highlight.Route Planner and.press.OK..
3.. Highlight.the.route.to.add.extra.stops.to.and.press.OK..
4.. Highlight.<Select to add via point>.and.press.OK..
5. Highlight a method to find the location and press OK..
6.. Highlight.the.location.of.the.point..Continue.until.all.points.
are.added.to.the.route.
> p m r
lannInG and odIfyInG outes
2