Panning The Chart With The Keys; Selecting An Item On The Map Using The Device Keys; Chart Symbols; Measuring A Distance On The Chart - Garmin ECHOMAP UHD2 Owner's Manual

Panning the Chart with the Keys

You can move the chart to view an area other than your present location.
1 From the chart, use the arrow keys.
2 Select Back to stop panning and return the screen to your present location.
NOTE: To pan from a combination screen, select Select Position.

Selecting an Item on the Map Using the Device Keys

1 From a chart or 3D chart view, select , ,
2 Select Select.

Chart Symbols

This table contains some of the common symbols you might see on the detailed charts.
Icon
Other features common to most charts include depth contour lines, intertidal zones, spot soundings (as
depicted on the original paper chart), navigational aids and symbols, obstructions, and cable areas.

Measuring a Distance on the Chart

1 From a chart, select a location.
2 Select Measure Distance.
A push pin appears on the screen at your present location. The distance and angle from the pin is listed in
the corner.
TIP: To reset the pin and measure from the current location of the cursor, select

Creating a Waypoint on the Chart

1 From a chart or a 3D chart view, select a location or object.
A list of options appears along the right side of the chart. The options that appear vary based on the location
or object you selected.
2 Select Create Waypoint.
14
, or
Description
Buoy
Information
Marine services
Tide station
Current station
Overhead photo available
Perspective photo available
to move the cursor.
.
Charts and 3D Chart Views