Ricoh Aficio 1075 Operating Instructions Manual page 593

*1
If you did not enter the interface name, it will be automatically set to the Ethernet
interface.
*2
Available when the 1394 Interface Board is installed.
*3
You can specify an interface when installing the optional 802.11b Interface Kit.
Parameter
(no parameter)
netmask
broadcast
❖ ❖ ❖ ❖ Changing the Interface
You can specify either the Ethernet interface or IEEE 802.11b interface when
using the optional 802.11b Interface Kit.
msh> ifconfig interface up
Note
❒ You cannot specify the optional IEEE 1394 Interface Board (ip1394 or
fwip0).
The following is an example for configuring an IP address of 192.168.15.16 on
Ethernet interface.
msh> ifconfig ether 192.168.15.16
The following is an example for configuring a subnet mask of 255.255.255.0 on
Ethernet interface.
msh> ifconfig ether netmask 255.255.255.0
Note
❒ This affects the configuration of the Network Interface Board of the IP ad-
dress used.
❒ The TCP/IP setting is the same as that for the Ethernet interface and IEEE
802.11b interface.
❒ To type an address using hexadecimal, prefix it by "0x".
❒ When using IEEE 802.11b, see p.116 "Setting IEEE 802.11b" for settings.
- Address - - -
❖ ❖ ❖ ❖ Subnet Mask
A number used to mathematically "mask" or hide the IP address on the net-
work by eliminating those parts of the address that are alike for all the ma-
chines on the network.
❖ ❖ ❖ ❖ Broadcast address
A specified address for sending data to specific devices on the network.
Meaning
IP address
subnet mask
broadcast address
Remote Maintenance by telnet
7
107