Setting Up As A Remote Printer - Ricoh Aficio 1075 Operating Instructions Manual

B In the [File Server Name] box, type the name of the file server in which a
print server is to be created.
Clicking [Browse], you can select a file server among those listed in the
[Browse File Server] dialog box.
C In the [NDS Context] box, type the context of the print server.
Clicking [Browse], you can select an NDS tree and an NDS context among
those listed in the [Browse Context] dialog box.
As a context, object names are typed from a lower object and divided by a
period. For example, if you want to create a print server into NET under
DS, type "NET.DS".
D In the [Print Server Operation Mode] group, click [As Print Server].
E Click [OK] to close the property sheet.
F After the confirmation dialog box appears, click [OK].
J J J J
On the [NIB] menu, click [Exit] to exit the NIB Setup Tool.
After this step, go to step
Note
❒ When not using IPX, it is recommended that you change the print server
protocol in the web browser from [TCP/IP+IPX] to [TCP/IP].

Setting Up as a Remote Printer

A A A A
Log on to the file server as a Supervisor or a Supervisor equivalent.
Note
❒ When using NetWare 4.x, 5/5.1, log on to the file server as an administra-
tor or administrator equivalent.
B B B B
Run the NIB Setup Tool.
Reference
See p.60 "Running the NIB Setup Tool" .
C C C C
Click [Property Sheet] and click [OK].
The [NIB Setup Tool - Network board list] dialog box of the Network Interface
Board appears.
D D D D
Click [IPX protocol].
J
on p.65 "Setting Up as a Print Server".
NetWare 3.x, 4.x, 5/5.1- Advanced Settings
5
71