Capturing Images Using Epson Twain; Starting Epson Twain - Epson FILMSCAN 200 User Manual

Capturing Images Using EPSON TWAIN

This section explains how to scan Advanced Photo System film
images. For instructions on scanning 35 mm negatives and
positives, see Chapter 4.

Starting EPSON TWAIN

Your scanner uses EPSON TWAIN to scan images. You can
scan images directly from the scanning software that comes
with your scanner or from an application program that
supports the TWAIN standard. This section describes how to
access EPSON TWAIN from the PhotoEnhancer Special Fun
Edition and Adobe Photoshop. To access it from another
application, see the documentation that came with that
application.
Note:
The EPSON TWAIN operating procedure is the same on both
Windows and Macintosh platforms. Screen illustrations below are
from Windows 95.
1. Load the optional cartridge holder containing the cartridge
film into the scanner as described earlier in this chapter.
Make sure that the scanner's READY light is on.
2. Make sure that your TWAIN-compliant application program
is open. If you have other TWAIN drivers installed in your
system, see step 3. If not, go directly to step 4.
Note:
For details on starting your application, see your application
user's guide.
5-8
Scanning Images From Your Film Cartridge