Loading 35 mm Slides
To prepare 35 mm slides for scanning, read the following. The
carrier can hold up to four slides.
1. Hold the slide carrier so that the arrows face up, then insert
your slide, face up, under one of the sets of tabs as shown
below. When you look at the slide from this side of the
carrier, the image in the slide should appear in its correct
orientation.
c
Caution:
Hold a slide by its edges. Touching the film surface can
leave fingerprints or other traces on the film.
Note:
You can load slides into any or all of the slots. If you load less
than four slides, remember which slots are filled, so that you can
easily select the correct frame to acquire from the scanner.
slide carrier
Insert the slide under the tabs.
Insert the slide so that it is face up
and the bottom of the slide covers
the number written on the slide
carrier.
Scanning 35 mm Film Images
35 mm slide
4
4-7