Getting To Know The Scanner - Epson FILMSCAN 200 User Manual

Getting to Know the Scanner

After you unpack your scanner, take a few minutes to learn
about its features, as shown below.
Front
READY light
On when the scanner is ready to scan. Flashes
to indicate that an error has occurred. See
"Error indicators" in Chapter 7 for more
information.
ERROR light
Flashing or on
if an error occurs.
Carrier slot and scanner door
Insert a 35 mm film carrier or
the optional cartridge holder
into this slot. Do not insert
other objects.
RESET button
Restarts the scanner.
Button
Press this button and push down the scanner
door before inserting the optional cartridge
holder into the scanner. Be sure to push down
the scanner door again to close the door.
OPERATE light
On when the scanner is
turned on.
OPERATE button
Turns on or off
the scanner.
Getting Started
1
1-7