Calibrating Your Screen - Epson FILMSCAN 200 User Manual

7. Click Install. When installation finishes, the following dialog
box appears:
8. Click Quit to complete the installation. When a dialog box
promps you to restart the computer, click Restart to restart
your computer and to activate the new software.
When you have finished the entire installation, perform the
EPSON Screen Calibration as described below.

Calibrating Your Screen

After you complete the software installation, use the EPSON
Screen Calibration utility to optimize the image output for your
screen.
Calibration is required because brightness levels, contrast, and
other characteristics are somewhat different for each type of
monitor. By calibrating your screen, you allow your software to
generate images that precisely match your screen's
characteristics.
1. Start up the calibration program.
If you use Windows 95/NT 4.0:
Double-click the EPSON Screen Calibration icon if the
EPSON Scanner folder is open, or click Start, point to
Programs and EPSON Scanner, and then click EPSON
Screen Calibration.
3-12
Setting Up the Scanner Software